"Amends" and "Amended by" (Back to field list) | AENDV GEAEND
| Document identifier and publication date of any document that is amended by or amends this document. Formats used: DOKNR(YYYY-MM) or DOKNR(YYYY-MM-DD) | If desired, a space can be provided between the document identifier and publication date. Additional information further identifying the document can be supplied (e.g. ID, FIDAS key). | Amends: DIN VDE 0100(1973-05) or DenkmSchG BY(1973-06-25) Amended by: GPatG(1979-07-26) or ISO 2562 AMD 1(1982-06) or DIN-Mitteilungen(1991); Nr. 1, S. A 25 |
"Instead of" (Back to field list) | ANSTATT
| There are 2 categories of documents to be used "instead of" the listed document: REFERS TO: Gives a technical rule that should be used instead of the listed technical rule. RECOMMENDS: The issuing body recommends the use of xxxx instead of the listed technical rule. | "Instead of" refers to documents which may or are to be used in place of the document in question. There are 2 categories: REFERS TO ("VERWEIS"): The LMBG collection contains documents having a number, German title and publication date but which only refer to another LMGB technical rule that is to be used for the subject in question. RECOMMENDS ("ANDERE TR"): In some cases, the issuing body of a document that is withdrawn without replacement recommends the use of a technical rule published by another body.
If desired, a space can be provided between the document identifier and publication date. Additional information further identifying the document can be supplied (e.g. ID, FIDAS key). | REFERS TO / VERWEIS: (LMBG L 02.00-1) refers to LMBG L 01.00-1(2002-05)
RECOMMENDS: (VDI 2059-2) recommends the use of ISO 7919-1(1996-07)* ISO 7919-2(2001-11)* ISO 7919-3(1996-07)* ISO 7919-4(1996-07)* ISO 7919-5(1997-02) |
"Intended as an amendment to" and "To be amended by" (Back to field list) | VAEND VGEAEND
| Document identifier and publication date of any document that will be amended by or will amend this document. Formats used: DOKNR(YYYY-MM) DOKNR(YYYY-MM-DD) where day is given | If desired, a space can be provided between the document identifier and publication date. Additional information further identifying the document can be supplied (e.g. ID, FIDAS key). | To be amended by: DIN 31000/A1(2006-02)
Intended as an amendment to: EN 71-4(1990-05) |
"Intended as replacement for" and "To be replaced by" (Back to field list) | VERSATZ VERSDUR
| Document identifier and publication date of any document that will be replaced by or will replace this document. Formats used: DOKNR(YYYY-MM) DOKNR(YYYY-MM, t) for partial replacements DOKNR(YYYY-MM) (draft) for drafts DOKNR(YYYY-MM-DD) where day is given | If desired, a space can be provided between the document identifier and publication date. Additional information further identifying the document can be supplied (e.g. ID, FIDAS key). | DIN 5307(2004-11)
ISO/DIS 9473-1(2004-03, t) for partial replacement
ISO/IEC 7816-4(1995-09)
GOST 25984.1(1983, t) for partial replacement |
"Replaces" and "Replaced by" (Back to field list) | ERSATZ ERSDUR
| Document identifier(s) and publication date(s) of predecessor and/or successor of a document. Formats used: DOKNR(YYYY-MM) DOKNR(YYYY-MM,t) for partial replacements DOKNR(YYYY-MM)(Draft) for draft standards DOKNR(YYYY-MM-DD) where day is given
| If desired, a space can be provided between the document identifier and the date. The tags "t" and "Draft" can be supplied in different formats, e.g. as "teilweise" (= partial). Additional information further identifying the document can be supplied (e.g. ID, FIDAS key). | DIN 6094-1(1993-11) DIN 4811-1(1978-19, t) for partial replacements, and/or DIN 6094-1(1996-03) DIN 4811-1(1992-04, t) for partial replacements |
Abstract in German (and/or English and/or French, where available) (Back to field list) | REF DREF EREF FREF
| Abstract (short description of document) | Abstracts can be supplied in one field with a separator as agreed or in separate fields | Abstract (German): Diese Europäische Norm enthält eine Liste der in Europa gehandelten Laub- und Nadelhölzer. Abstract (English): This European Standard lists commercial hardwood and softwood timbers used in Europe. Abstract (French): Cette norme Européenne établit la liste des bois commerciaux, feuillus et résineux, utilisés en Europe. |
Additional information / title (Back to field list) | TITELERG
| This field either contains additional elements of the title and/or important information for the user. | Additional title information can be supplied free of charge with the title(s) in the requested language(s), where available. It can be separated from the title by characters defined by the customer or supplied as a separate data field. | Not for new constructions. For new constructions see LN 29555". or "Inadvertently withdrawn" |
Additional publication data (Back to field list) | -
| Availability Availability of document Scheduled publication date Estimated date of publication Price changes Price until... or Price as from... Paper format Electronic media Format supplied | - | Availability In preparation, in print, out-of-print,etc Scheduled publication date 2005-11-18 Price changes E.g. for price group 06 RW-DIN: Price as from2005-01-01 (29,40 EUR) Price until 2005-12-31 Price as from 2006-01-01 (30,30 EUR) Paper format A4 Electronic media Videodisk (DVD) DVD, CD-ROM Diskette(s) Online service Magnetic tape Transparency(ies) Slide(s) Video .... Format supplied A3 size paper A3/A4, folded laminated |
Also in (Back to field list) | AUCHIN
| Shows other publications in which the document can be found (e.g. DIN Handbooks) | This field can also contain information as to whether a publication is still available or whether the title has been discontinued. If desired, only available publications will be listed. Additional information further identifying the publication can be supplied (e.g. ID, FIDAS key). | DIN-TAB 193(1991)=Discontinued =*DIN-TAB 193(2000)=Discontinued =*DIN-TAB 193(2005) |
Amendment notice 1 (misprint revisions) (Back to field list) | ANZ
| Gives any corrections of misprints or any other similar corrections published in the "DIN-Anzeiger für technische Regeln". This is a historical data field, since documents are corrected by corrigenda. | - | Misprint revision (correction): Im Abschnitt 4.14 ist der genannte Bezug auf Abschnitt 4.2.4 nicht korrekt. Der Abschnitt muss wie folgt lauten: "4.1.4 Schutz- und Sicherheitsmaßnahmen nach den Unfallverhütungsvorschriften und den behördlichen Bestimmungen, ausgenommen Leistungen nach Abschnitt 4.2.5". |
Amendment notice 2 (editorial changes) (Back to field list) | ANZ
| Gives any editorial changes or notes published in "DIN-Anzeiger für technische Regeln". This is a historical data field, since documents are corrected by corrigenda. | - | Editorial change (correction): In Abschnitt 4.4.1 muss das Wort "zulässig" in "unzulässig" geändert werden. or:a) Anpassung der für die Entlassung zulässigen Äquivalentdosisleistung; b) redaktionelle Überarbeitung; c) Verweis auf die Strahlenschutzverordnung und die Richtlinie "Strahlenschutz in der Medizin" in ihren jeweils gültigen Fassungen. |
Author (Back to field list) | AUTOR
| Author (Committee responsible for the technical rule) | Full information is available (e.g. contact partner(s), address). A list of authors and their full titles is supplied. | Long form: NA Bauwesen or short form: NABau |
Availability in electronic format (Back to field list) | ELLIEF
| States whether document is available in an electronic format, and where applicable, the quality of the reproduction | In some cases documents with the qualifier "differs from original" or "content no longer retrievable/readable" are not available the reason for this is listed under GRUND. If the document is nevertheless at least partly available, this is also stated. The size of PDF files in kB can be given. If a document is not kept in stock and is only available via a PDF archive, this is also stated.If a full text document in the electronic archive has been or will be exchanged for a new version, the reason for this and the date the exchange will take place can be given. Field names and separators can be agreed. | STATUS: reproduces original document, content retrievable differs from original document, content no longer retrievable REASON: contains supplements, color illustrations, CD, DVD, oversized format etc. NOTE: only partly reproducible, because original contains CD, DVD, slides etc. PDF file size (in kB): 102,19 Not in stock: NURPDF Text exchanged for new version 2004-08-16 Reason for exchange: Technical reasons |
CAD standards (Back to field list) | CAD
| Indicates a CAD standard | Subjects, languages, formats and notes relating to individual elements of the standard can be included in the output.Designations and separators can be agreed. | Subject: 0029 Language: de Format: 2D+3D Note: nur flache Muttern |
Clause headings (Back to field list) | K-UEB
| Headings of the clauses in the document | - | - |
Clause searchwords (Back to field list) | K-WORT
| Search words generated from the individual clauses of a standard or technical rule | - | - |
Co-author (Back to field list) | MITAUT
| Co-author (Committee jointly responsible for the technical rule) | Full information is available (e.g. contact partner(s), address). A list of authors and their full titles is supplied. | see Author |
Co-existence period for CE marking (Back to field list) | KOEXANFANG KOEXENDE
| Date of the beginning and end of the existence period for CE marking | Records are given the date KOEXANFANG and KOEXENDE on the basis of 89/106/EEC (Council Directive 89/106/EEC of 21 December 1988 on the approximation of laws, regulations and administrative provisions of the Member States relating to construction products and publications of notifications in the Official Journals of the EU. | |
Collection of technical rules (Back to field list) | REGELW
| If an issuing body publishes more than one collection of rules or standards this can be identified by the collection. Collections may be subordinated under one larger collection. | Further information on the various collections can be provided here (e.g. full title in various languages, assignment to issuing body and/or distributor). A list of all standards collections giving the issuing body. distributor, etc. is provided. | DIN, LN, and WL belong to the same issuing body. The DIN collection of technical rules includes: DIN, DIN EN, DIN EN IEC, DIN EN ISO, DIN ETS, DIN IEC, DIN ISO, DIN VDE, DIN CWA, DIN-FACHBERICHT, DIN-MBL. |
Country of origin (Back to field list) | LAND
| Gives country or region of origin | - | Germany, United Kingdom, Northrhine-Westphalia |
Cross references (Back to field list) | ZITAT
| If a document references other documents, those documents are listed here. Formats used: DOKNR(YYYY-MM) or DOKNR(YYYY-MM-DD). | If desired, a space can be provided between the document identifier and publication date. Additional information further identifying the document can be supplied (e.g. ID, FIDAS key). | DIN 6160(1966-08) or prEN 681-2(1992-02)(draft) or LadSchlG(1956-11-28) |
Date of issue (Back to field list) | PUBDAT
| Date of issue for drafts | The actual date (Ist-Termin) identifies the date of issue (fixed when setting the actual date (Ist-Termin) for reception of the document by Beuth Verlag for print approval and printing (EIN-BV Druckfreigabe und Druck). | DIN EN 131-1/A1 (draft): PUBDAT=2010-11-22 |
Date of issue of language version (Back to field list) | FASSUNG
| Date of issue of a version of the original document in a different language | The publication of a standard, draft standard or technical rule is generally the same as that of the associated translations. There are, however, a number of collections in which the publication date of the document can differ from that of a translation. The field named VERSION has been introduced to document this publication that deviates from the master record. The field is filled in if the publication date of the language version (filed as the dependent record in the DITR database) differs from the publication date of the standard or technical rule. In such cases the publication date of the master record is given in the field for the publication date of the language version. This is necessitated by the DITR database logic, being required to enable the language version to be assigned directly to the master record. In such cases the user must also evaluate the VERSION field. Nowadays the VERSION field is used for numerous collections. It often occurs in the JIS (Japanese standards) collection where the publication date of the English-language translation differs from that of the original Japanese document. The International Union of Railways (UIC) also uses VERSION. Other collections are ISO, IEC, CSA (Canadian standards) and DVS. Further information on LANGUAGE can be found under the following keywords: Language version Language information Text fields in other languages Original language | Identifier: UIC 108-1 Language: de Edition: 2005-08Version: -
Identifier: UIC 108-1 Language: en Edition: 2005-08 Version: 2006-02
Identifier: UIC 108-1 Language: fr Edition: 2005-08 Version: 2005-11 |
Document identifier (Back to field list) | DOKNR
| Normally consists of an abbreviation standing for the name of the body of rules, a sequential number, and where relevant, all further information. The document identifier is either as printed on the document, cited in accordance with the rules of the publishing body, or is assigned by DIN Software GmbH. | Documents can have more than one document identifier. As a rule, all alternative document identifiers are cited. | DOKNR: DIN 9264-2 DOKNR with alternative document identifiers: DIN VDE 0628*DIN 57628*VDE 0628 |
Edition (Back to field list) | EDITION
| Indicates the history of a standard or technical rule and shows how often a document has been revised and reissued. | Information about the edition are mostly located on the cover page: "First edition", "second edition", etc., and are limited to the actual standard or technical rule.Therefore, corrections, Technical corrections or additions will not get any information on the edition. | ISO 9405:2015: 2
API 510:2014 10 |
Effective date (Back to field list) | GUELT
| Normally, technical rules are effective as of their publication date. In exceptional cases, however, a specific effective date can be specified in documents that is not the same as the date of edition or for which the exact day of issue has to be specified (, e.g. in the case of safety-related specifications). | Standard format: YYYY-MM-DD If available and, relevant: the approval date ("APPROVED") can also be provided. | DIN 13098-1 states that it is "Valid from 1 June 1988". Since the effective date (1988-06-01) is different from the date of edition (1987-12) it must be stated here. |
English descriptors (Back to field list) | EDESK
| English descriptors (search terms or keywords) describing the contents of a document (identical to keyword index in DIN Catalogue) | In the DITR database there are currently (as of July 2014) approx. 51,500 German, 47,700 English and 22,000 French descriptors that are maintained as a controlled, interdisciplinary vocabulary and continually expanded. Every document registered in our database is comprehensively and systematically described by means of descriptors in up to three languages. The descriptors generally take the form of nominative singular nouns unless only the plural form is used. The descriptors are subject to a stringent regime and can be combined to form a structured vocabulary using the DITR thesaurus. In this way they have an umbrella function over various related standards: records with the same descriptor have similar a content, but this cannot be recognized by only looking at the visible part of the document, such as the title. Searching by descriptors, then, gets better results than a search by title or even a full-text search. | Document identifier: DIN 45643 Title: Messung und Beurteilung von Fluggeräuschen English descriptors: Acoustics * Airplane noise * Aircraft * Noise measurements * Aerospace transport * |
English keywords (Back to field list) | EREG
| As for English descriptors | English keywords are a subset of the english descriptors | Bottles*Finishes*Means of packaging |
English title (Back to field list) | ETITEL
| English title of the document | The title can be delivered with spaces or with fixed spaces (non-breaking spaces) indicated by " ", which ensures that the sequence of characters between the fixed spaces is not broken. | Sound level meters - Additional requirements for special measuring tasks or without fixed spaces Sound level meters - Additional requirements for special measuring tasks |
Expiry date (Back to field list) | EINSPR
| Date until which objections against the publication of a draft technical rule may be made. Format used: YYYY-MM-DD | Also available: Date until which objections against the withdrawal without substitution of a standard may be made. Format: YYYY-MM-DD | 1996-06-30 |
French descriptors (Back to field list) | FDESK
| French descriptors (search terms or keywords) describing the contents of a document | In the DITR database there are currently (as of July 2014) approx. 51,500 German, 47,700 English and 22,000 French descriptors that are maintained as a controlled, interdisciplinary vocabulary and continually expanded. Every document registered in our database is comprehensively and systematically described by means of descriptors in up to three languages. The descriptors generally take the form of nominative singular nouns unless only the plural form is used. The descriptors are subject to a stringent regime and can be combined to form a structured vocabulary using the DITR thesaurus. In this way they have an umbrella function over various related standards: records with the same descriptor have similar a content, but this cannot be recognized by only looking at the visible part of the document, such as the title. Searching by descriptors, then, gets better results than a search by title or even a full-text search. | French descriptors: Acoustique * Bruit d'aeronefs * Aeronef * Mesure du bruit * Transport aérospatial *
|
French keywords (Back to field list) | FREG
| As for French descriptors | French keywords are a subset of the French descriptors | Appareil électrique*Chauffe-eau*Equipement ménager |
French title (Back to field list) | FTITEL
| French title of the document | The title can be delivered with spaces or with fixed spaces (non-breaking spaces) indicated by " ", which ensures that the sequence of characters between the fixed spaces is not broken. | Emballages; moyens d'emballage pour préemballages; détermination des dimensions pour boîtes pour tubes |
Full text address (Back to field list) | VOLLTXT
| Where applicable, gives number and/or address where the document can be accessed as a full-text product and/or downloaded. | For example, "NormCD05" indicates that the full text of the document can be found on NORMCD05. The address "POD9509140.0004" includes the prefix "POD" (print-on-demand) followed by the document's "EDP number" assigned by Beuth Verlag (9505140) and the number of pages (in this case 4). The Beuth Verlag EDP no. is also used to identify the full-text document. For technical reasons, the number of printed pages may differ from that of the original document (e.g. because a larger paper size is used). The address can be modified as needed, for instance there may be a prefix indicating the language a document is in. | NormCD05*NormCD21*POD9509140.0004 |
Further document identifiers (Back to field list) | -
| The following document identifiers can also be supplied: GEANDERT: Modified document identifier ORIGINAL: Original document identifier used by the issuing body EXTERN: Alternative number used by issuing body JISDOK: Alternative number for JIS documents REFNR: Reference number used by issuing body SYNEXTERN: Alternative number used by issuing body VDEDOKALT: Old VDE numbers VERALGSBEZ: Publisher's article number VOBDOK: VOB identifier BSIDOK: Alternative number for BSI documents | GEAENDERT gives the previous identifier.
At present there are no entries for BSIDOK.
Field name and field separators can be agreed ASTM C1357-02(ORIGINAL zu DOKNR ASTM C 1357). | DIN IEC 795 (GEAENDERT to DOKNR DIN IEC 60795)
ASTM C1357-02(ORIGINAL to DOKNR ASTM C 1357)
ISO 1189 (EXTERN to DOKNR BS 5550-3.4.2) |
German descriptors (Back to field list) | DESK
| German descriptors (search terms or keywords) describing the contents of a document | In the DITR database there are currently (as of July 2014) approx. 51,500 German, 47,700 English and 22,000 French descriptors that are maintained as a controlled, interdisciplinary vocabulary and continually expanded. Every document registered in our database is comprehensively and systematically described by means of descriptors in up to three languages. The descriptors generally take the form of nominative singular nouns unless only the plural form is used. The descriptors are subject to a stringent regime and can be combined to form a structured vocabulary using the DITR thesaurus. In this way they have an umbrella function over various related standards: records with the same descriptor have similar a content, but this cannot be recognized by only looking at the visible part of the document, such as the title. Searching by descriptors, then, gets better results than a search by title or even a full-text search. | Document identifier: DIN 45643 Title: Messung und Beurteilung von Fluggeräuschen German descriptors: Akustik * Fluglärm * Flugzeug * Geräuschmessung * Luft- und Raumfahrt * |
German keywords (Back to field list) | REGIST
| As for German descriptors | German keywords are a subset of the German descriptors | Flasche*Mundstück*Packmittel |
German title (Back to field list) | DTITEL
| German title of the document | The title can be delivered with spaces or with fixed spaces (non-breaking spaces) indicated by " ", which ensures that the sequence of characters between the fixed spaces is not broken. | Luft-und Raumfahrt -Masseverbinder -Teil 2:Betriebstemperatur -65 °C bis 150 und 260 °C; Technische Lieferbedingungen or without fixed spaces:Luft- und Raumfahrt Masseverbinder Teil 2: Betriebstemperatur -65 °C bis 150 und 260 °C; Technische Lieferbedingungen |
ICS classification (Back to field list) | ICS
| ICS classification (International Classification for Standards) used by ISO | Up to four ICS numbers can be used to classify a document.A list of all ICS numbers will be supplied. | 25.100.60 OR 01.040.17*17.140.01 |
ICS information (Back to field list) | -
| Information on ICS notation | The International Classification for Standards (ICS) is a classification system published by ISO that is specifically geared to the requirements of normative documents. With some 1,000 classes, ICS enables standards to be assigned to classification groups according to their content. The ICS notation is used to group together documents with similar content independently of formal criteria such as author, collection or type of document. ICS numbers are assigned by experienced staff who strictly adhere to ICSs syntax. ICS is used by standards organizations worldwide, enabling multinational databases such as PERINORM to be searched independent of language. The data in Beuths webshop can also be searched through using the ICS system. All records in our databases will continue to be assigned ICS information. The hierarchical structure of the notations enables searching from the general to the specific: 11 Health care technology 11.040 Medical equipment 11.040.25 Syringes, needles and catheters | ICS number, German subject group name English subject group name French subject group name |
Identical to (Back to field list) | IDENT
| References to identical and related international, European or other national documents, showing the kind of relationship. Format used: DOKNR(YYYY-MM)<Relationship> | Types of relationship are: IDT Identical MOD Modified NEQ Not equivalent Additional information further identifying the document can be supplied. | ISO 8162-1985<MOD>, NF B35-601-1962<NEQ>, FuttMV1981ÄndV 9-1991<IDT>, S A 302-1992<IDT> |
Information on author (Back to field list) | -
| Information on the authors | - | Code Full designation Status (historical) Code, Full name, Status (historical) |
Information on data sets taken from the respective data production (Back to field list) | -
| Details of data sets taken from the respective production (e.g. because of a later date of issue) | - | Attached to the record: Fidaskey, ID, EDP number, document identifier, date of edition |
Information on inactive drafts (Back to field list) | -
| Details of draft standards (DIN, LN, VG, WL, BWB-WL) that were included in the weekly advance notification but are deleted (rendered inactive) in the monthss production period | - | The following are displayed: A reference to the master record or translation, language code, Fidas key, EDP number, document identifier, publication date |
Information on rendered inactive (deleted) data sets (Back to field list) | -
| Details of deleted data sets | - | Attached to the master record or translation with language information: Fidaskey, ID, EDP number, document identifier, date of edition |
Information on standards collection (Back to field list) | -
| Information on standards collection | - | Issuing body, distributor, ordering address, first time collection included in database, update rhythm etc. |
Issuing body (Back to field list) | HRSG
| Body which issued the technical rule | Other information may also be provided (e.g. contact partner at issuing body, address, Internet address) | Can be provided in short form (e.g. DIN) or long form (e.g. DIN Deutsches Institut für Normung e.V.) |
Journaling (Back to field list) | JOURNAL
| Lists which data fields have been modified since the previous month | Journaling can also be provided for withdrawn data sets. | Form as agreed Example: JOURNAL=DOKNR*ERSDUR |
KGS classification (Back to field list) | KGS
| KGS classification (National Standard Classification) | The KGS as a classification was used in the USSR and is still in use in Russia and the former Soviet Republics (CIS). In addition to the ICS the KGS is still in great use, because a large part of the KGS-classified GOST standards are still being used across the countries of the former USSR. | GOST R 54889(2012): G86 |
Language information (Back to field list) | -
| Language information | Further Information: Date of issue of language version Language version Text fields in other languages Original language | Language name Language code |
Language version (Back to field list) | TRAUS
| Each language version has its own distinct data set, although all versions of a document have the same "FIDAS key". | The data set for each language version has its own ID number.Further Information: Date of issue of language version Language information Text fields in other languages Original language | For instance, here the English translation of DIN EN 1748-2-2 (2005-01) would be shown with the master data set. |
Legal status (Back to field list) | RECHT
| The following are possible: GSG: Document is made mandatory by being listed in the German Equipment Safety Law Index (Gerätesicherheitsgesetz-Verzeichnis) HARMON: Document is harmonized in accordance with (European Directive) MANDAT: Document is mandated by (European Directive) MITTEILUNG: Document is harmonized in accordance with (European Communication) NATUMSETZ: Document implements European law at the national level | Format: YYYY-MM-DD
If desired, a space can be provided between the document identifier and publication date. Additional information further identifying the document can be supplied (e.g. ID, FIDAS key). | DIN EN 81-2: GPSGV12Verz(2001-06-05)*GPSGV12Verz(2004-02-25)*95/16/EG(1995-06-29)<H>*98/37/EG(1998-06-22)<M>*95/16/EGMitt(1999-03-31)*95/16/EGMitt 2004(2004-02-10)*95/16/EGMitt 2005(2005-08-06) Legal statuses are: GSG, GSG, HARMON, MANDAT, MITTEILUNG, MITTEILUNG, MITTEILUNG or BaumaschEmVfBek: 79/113/EWG(1978-12-19) Legal status: NATUMSETZ |
Legal version (Back to field list) | FASS
| Original publication date and date of current version/amendment. | This category is only delivered for legal publications (e.g. laws, regulations) and can be supplied free of charge with the German title. It can be separated from the title by characters defined by the customer or supplied as a separate data field. | (Luftverkehrsgesetz) vom 1. August 1922 in der Fassung vom 14. Januar 1981 = (The German Air Traffic Law) of 1 August 1922 as amended on 14 January 1981 |
MR-TYPSNIF (Back to field list) | MR-TYPSNIF
| Type of standard in terms of safety of machinery. Is maintained as attribute: Typ-A (basic safety standard); Typ-B (generic safety standard): -Typ-B1 (standard on particular safety aspects); -Typ-B2 (standards on safeguard); Typ-C (machine safety standard). | The attribute MR-TYPSNIF is maintained exclusively on DIN-Standards. The safety of machinery is one of the central subjects in standardization and occupational safety and health (OSH). The development of machinery safety related standards is based in DIN EN ISO 12100 as well as CEN Guide 414 and ISO Guide 78. They provide a classificaton in three categories: Type-A-Standards (basic safety standards); Type-B-Standards (generic safety standards); Typ-C-Standards (machine safety standards). The information is extracted via SNIF directly from the fulltext of DIN-Standards and saved as attribute in the DITR-Database. In this way it is possible to search machine safety standards specifically based on their typification. | DIN EN ISO 12100 Typ A
DIN EN ISO 13850 Typ B2 |
Non current date (Back to field list) | NONCURRENT
| Only for SAE standards: From this date on the technical rule is no longer permitted to be used for new constructions | A current normative document becomes historical at a documented point in time if a revised version replaces this document or the content of the document no longer represents the state of the art and the document is not replaced by another. On top of this, in the SAE collection the date NONCURRENT can also be used. This, combined with the resulting change in the document identifier, sometimes confuses customers. It states the moment in time from which it is no longer permitted to use the normative document for new designs, while at the same time the document is not yet being withdrawn, remaining current for designs before the NONCURRENT date. Documents published by SAE are subjected to five-yearly-review, following which they are either withdrawn or the NONCURRENT date confirmed. If NONCURRENT is confirmed, a further NONCURRENT date is given while ensuring its traceability to the first time the document was given this special status. When issuing new versions SAE uses the next letter of the alphabet to the one used for the immediately previous version. This applies both to withdrawn documents and when a NONCURRENT date is set for the first time. The apparently new version only differs in terms of this date. The DITR database not only shows the original form of the document identifier, but also the dates Edition, Withdrawal and Noncurrent. | Original document identifier (old): SAE AMS 4303A Original document identifier (current): SAE AMS 4303B Title: Aluminum Alloy Plate, 2.7Cu 2.2Li 0.12Zr (2090-T81) Solution Heat Treated, Cold Worked, and Aged Edition: 2000-08-01 Withdrawn: - Noncurrent: 2007-04
Original document identifier (old): SAE AMS 7730E, SAE AMS 7730D Original document identifier (current): SAE AMS 7730F Title: Depleted Uranium Castings Edition: 1987-10-01 Withdrawn: 2009-09 Noncurrent: 2001-05, 2006-05
|
Notes (on application of document) (Back to field list) | BEMERK
| This data field includes notes on aspects that should be taken into account when applying the document. | Notes can be written in or translated into other languages than German, e.g. English or French. | - |
Original language (Back to field list) | ORIGIN
| Gives original language of document (does not refer to any translations!) | A list of languages and abbreviations used is supplied. Further Information: Date of issue of language version Language version Language information Text fields in other languages | Available as text: German, English or as code: de*en or combined: part English, part German coded: en(t)*de(t) |
Other transitional period (Back to field list) | FRIST
| This field has been introduced to cover other periods not covered by ÜFRIST above. It gives transitional periods which are not related to a replacement or amendment. | This data field is supplied free of charge together with the transitional period data fields. If desired, a space can be set between the document identifier and the publication date. Besides these entries, further categories of documents denoted as related (e.g. ID) can be coupled to this information to allow unambigous identification of the relevant document. See "Transitional periods" for more information. | (DIN 60400, 2005-05): DIN EN 60400(2000-11) |
Overviews (for drafts) (Back to field list) | EINF-E
| These overviews contain information on the content of the draft standard. | - | This 2nd draft standard applies to non-loadbearing internal partitions (partitions, for short). The draft standard does not apply to internal partitions designed to withstand vertical loads or intended as bracing. This draft standard can also be used for internal partitions used as part of fall prevention systems. The document does not apply to mobile partitions that can be moved in horizontal and/or vertical direction (such as sliding or folding walls)
(extract) |
Overviews (for standards) (Back to field list) | EINF-N
| These overviews contain information on the content of the standard | - | This standard specifies dimensions for steel clamping plates used to mount beam supporting plates in steel construction. Four examples demonstrating methods to determine permissible loads can be used to calculate a variety of installation types... (extract) |
Pages (Back to field list) | SEITEN
| Gives number of pages the document has (where available) | - | 4 |
PR-TITEL (Back to field list) | PR-TITEL
| PR-TITEL descriptors are only available in German language. PR-TITEL-descriptors are search terms generated from titles of DIN aerospace standards. They are assigned to the corresponding dataset as descriptors with the descriptortype PR TITLE. | PR-TITEL-descriptors are search terms generated from titles of DIN aerospace standards. They can consist of single title keywords like descriptive adjectives ("slotted") or material numbers ("AL-P7075-T73511"), but also of keyword groups like phrases ("Hermetic receptacle ", "with round flange attached by welding or brazing", " inactive for new design") or terms for physical quantities ("Classification: 490 MPa (at ambient temperature)/425 °C"). PR-TITEL-descriptors complement DITR-descriptors by specific search terms, thus enabling precise researches. They are generated automatically and checked intellectually with a focus on syntactic and semantic aspects: syntactical and conceptual units are preserved, and different spellings are harmonised. | PR-TITEL descriptors are only available in German language. |
Presumption of conformity - Date of begin/cessation (Back to field list) | HARMENDE HARMANFANG
| Date of first publication in the Official Journal (e.g. in connection with the Machinery Directive) or date of cessation of presumption of conformity of superseded standard (e.g. in connection with the Machinery Directive) | Format: YYYY-MM-DD | Begin: EN 115 (1995-01): 1995-07-01 Cessation: EN 115 (1995-01): 1998-10-15 |
Presumption of conformity - restrictions (Back to field list) | KONFORMEIN KONFORMTXT
| Reference to the official source which states that restrictions in respect of the presumption of conformity of a specific standard exist or have been withdrawn, and reference to the official text of the restriction | Harmonized standards are already an indispensable tool for industry and business. The presumption of conformity associated with applying standards is an important element of the Internal Market, as the market authorities can assume that a product meets the essential health and safety requirements set out in the EU New Approach Directives. If, however, it should transpire that a harmonized European standard does not fully provide the detailed specifications needed to supplement the requirements of an EU Directive, the EU Commission can withdraw publication of the source in the Official Journal of the EU or it can restrict the presumption of conformity. In the latter case, the presumption of conformity explicitly does not apply to certain essential requirements of the Directive. In the DITR database this information is given by the fields KONFORMEIN and KONFORMTXT. This information only applies in connection with harmonized European Standards (EN, EN ISO) and has so far been documented for 14 current harmonized EN Standards. | - |
Price group information (Back to field list) | -
| Price group information | - | Standards collection, price group, gross price in EUR, etc. |
Price/Price group (Back to field list) | PREISG
| Price group or gross price of document (where available) | Other prices are available (e.g. for translations). Price information can be qualified (e.g. "Price as from ....", "Price until ...") A list of price groups for the standards collection in question and the gross price will be supplied. | As price group: 07 RW-DIN or as gross price (cash) in euros 34,40 EUR |
Prolongation of validity (Back to field list) | APPR-ENDE APPROVED
| The prolongation of validity approval end at this date. Is used to identify the routine prolongation of validity common in the USA | - | - |
Publication date (Back to field list) | AUSG
| Date the document was published | Format according to ISO as either YYYY, YYYY-MM or YYYY-MM-DD
| 1984 1984-01 1984-01-26 |
Published in (Back to field list) | IN
| Primary source of a document if published in a bulletin or journal and not as a separate document | - | BGBl I, 1986, Nr. 33, S. 618 |
Publisher/Distributor (Back to field list) | VERLAG
| Publishing house or selling agent of the document. | Full information is available (e.g. contact partner(s), address). | Beuth Verlag GmbH and/or distributor, when not same: VDI-Verlag GmbH or in short form (where avail.): BV and/or VDI |
Reason for withdrawal without replacement (Back to field list) | ZURGRUND
| Reason for withdrawal without replacement is given in text form, if available | If available, the reason for the withdrawal without replacement is stated in text form. | DIN 50010-1 (1977-10): Withdrawn; no longer needed. |
Reference to terminological definitions (Back to field list) | -
| Indicates standards in which terms are defined | - | Terminology standard or Terms and definitions None (= does not contain terminological definitions) |
Segmentation of document identifier (Back to field list) | DOK-ZER
| Breaks up document identifier into prefix, main number and all other parts | - | DIN ISO 228-1 Beiblatt 1: DIN ISO and 228 and 1 and 1 |
Short title (short title or abbreviated title) (Back to field list) | ATITEL KTITEL
| Authorized short title for a document or authorized abbreviation of the title | Normally used for laws and regulations. | ChemG (abbreviation of "Chemikaliengesetz ChemG") or Chemikaliengesetz (short version of "Gesetz zum Schutz vor gefährlichen Stoffen") |
Sortkey (Back to field list) | SORT
| Used only for sorting technical rules, beginning with DIN documents, followed by an alphabetical listing of other collections and within each collection a numerical listing of documents. The length of the sorting string is not limited. | NOTE: This field may change at any time due to technical reasons. The technical rule collection sortkey, document sortkey and/or status (document type) sortkey can be delivered in any combination. | For DIN 18056: Standards collection sortkey: AEAA Document sortkey: K@ZZ@0000018056AA@ Status sortkey: T |
Statistics (Back to field list) | -
| Statistical information on data supplied, broken up into new data, modified, withdrawn or historical | - | Depends on standards collection |
Status (document type) (Back to field list) | DOKART
| There are basically three types of document: standard, technical rule, and legislation. These are further differentiated according to the status of the document (e.g. standard, prestandard or draft). | The types of document possible here are: N Standard VN Prestandard N-E Draft standard N-E-S Final draft (Austrian standards only) VN-E Draft prestandard TR Other technical rule TR-E Draft technical rule UVV Accident prevention regulation G Law B Notice V Regulation VV Administrative regulation | Either the symbol (e.g. N) or the full name (e.g. Standard) can be delivered. |
Subject group classification "Food technology" (Back to field list) | FACHNOT
| Subject group classification "Food technology" | - | 010 (Nahrungsmittelmaschinen) |
Subject group classification "Railway" (Back to field list) | FACHNOT
| Subject group classification "Railway" | The "Railway" classification system is used for indexing technical rules and regulations specifically for railways. While the International Classification for Standards (ICS) uses ten notations for railways, the Railway classification has 84 classes. This enables a more exact assignment of attributes to describe content, resulting in a more exact search for technical rules relating to railways. In July 2009 5,519 current documents/records from 73 different collections in the DITR database include at least one Railway class. The Railway classification system is available in English, French and German and is on DIN Softwares website at http://www.din-sw.de/. | 101 (Car bodies) |
Subject group classification "Safety and health" (German data only) (Back to field list) | FACHNOT
| Subject group classification "Safety and health" | - | 02.25*DB (02.25 = Spanwerkzeuge; DB =Quetschen, Einklemmen) |
Subject group classification "Standards for construction" (German data only) (Back to field list) | FACHNOT
| Subject group classification "Standards for construction" | - | 2330 (Maurerarbeiten) |
Supplements (Back to field list) | ERGAEN
| This data field includes supplements, corrigenda, amendments, addenda, etc. | Additional information further identifying the document can be supplied (e.g. ID, FIDAS key). | DIN VDE 0299-1: DIN-Mitteilungen von 1986; Nr. 7, S. A274 (Berichtigung der Tabelle 2) |
Synonymous document identifier (Back to field list) | SYNDOK
| Another means of identifying the document or a simplified number for easer searching. | "DOKNR SYNDOK": This field is used when carrying out a wide search, for example when the user is not sure of the form the document identifier takes. It is used as a search aid. | SYNDOK to DOKNR DIN EN ISO 717-1/A1: DIN EN ISO 717*DIN EN ISO 717-1*EN ISO 717*EN ISO 717-1*EN ISO 717-1/A1 |
Tabular layouts (Back to field list) | S-MERK
| Indicates a Tabular layouts standard | If desired, a space can be provided between the document identifier and publication date. Additional information further identifying the document can be supplied (e.g. ID, FIDAS key). | (DIN 3015-2, 1999-01): DIN 4000-44(2000-12) |
Text fields in other languages (Back to field list) | -
| Text fields in other languages can be supplied, where available (e.g. title, document identifier, descriptors) | Titles can be supplied, where available, in Turkish, Spanish and/or Russian, and Russian descriptors can be supplied, where available. Further Information: Date of issue of language version Language version Language information Original language | Italian title: Estremità per funi di acciaio- Sicurezza-Parte 4: Capocorda di metallo o resina. (GOST R ISO 8573-1, 2005):Russian Document no.: ÃÎÑÒ Ð ÈÑÎ 8573-1-2005 |
Transitional periods (Back to field list) | UEFRIST
| If a document is withdrawn and replaced by one or more new documents, sometimes a transitional period has been set during which the withdrawn document or parts thereof may continue to be applied. This information is coupled with a replacement notice, amendment notice or a notice of other transitional periods. A text is generated and the relevant provisions are given when this data field is selected. Transitional periods are documented when laid down by the relevant issuing body. | The data fields "Replaces/Replaced by" and "Amends/Amended by" should be selected together with "Transitional periods". The data field "Other transitional period" is automatically delivered free of charge with "Transitional periods". The texts ÜFRISTVON and ÜFRISTNACH (see examples) are also available in English and French. Notes may be included in this data field. For instance if EN 60335-2-6, 1990-11 edition, has a transitional period of ÜFRIST=2000-04-01, the following text will be added to the "Amended" statement: "For products which meet the requirements of EN 60335-2-6:1990 before 1. April 1995." | Example of transitional period information coupled to a replacement statement:
DIN 15990, 1981-12 replaces DIN 15990, 1974-08 with a transitional period of 1982-05-31 ((no explanation))
DIN 15990:1981-12 contains the text ÜBFRISTVON.de "Daneben gilt DIN 15990 (1974-08) noch bis 1982-05-31." ((= DIN 15990 (1974-08) also applies until 1982-05-31))
DIN 15990, 1974-08 is replaced by DIN 15990, 1981-12 with a transitional period of 1982-05-31 ((no explanation)).
DIN 15990:1974-08 contains the text ÜFRISTNACH.de "Übergangsfrist, festgelegt durch DIN 15990 (1981-12), bis 1982-05-31 beachten." ((= Note transitional period until 1982-05-31 as specified in DIN 15990 (1981-12))) |
Translations (Back to field list) | UEBERS
| Refers to existence of authorized translation or un-authorized manuscript translation | A list of languages and abbreviations used is supplied. | Available as text: English or English manuscript or as code: en or en-M |
Unique record key (Back to field list) | ID
| Number used in DITR databases to identify each distinct data set, incl. data sets for translations. | Often the 8-digit key (FKEY) is assigned to a data set. | 65793548 |
Update flag (Back to field list) | UPDAT
| Code for changes made to document status since the previous month. | Instead of supplying an additional data field, further information can be added to the update flag, or where desired, both can be delivered | New, Modified (or: Modified can either refer to modification of data set or of document itself), Withdrawn |
Valid together with (Back to field list) | GILTMIT
| Indicates that a document is to be used together with another document. | If desired, a space can be provided between the document identifier and publication date. Additional information further identifying the document can be supplied (e.g. ID, FIDAS key). This category can also be supplied in text form, and in several languages, if so desired. | DIN VDE 0700-208 (1981-12): DIN VDE 0700-1(1990-11) or To be used together with DIN VDE 0700-1 (1990-11) |
Version date (Back to field list) | VERSION
| Date on which a version is published with editorial changes or changes to its content | From time to time, the issuing body makes changes to valid normative documents. This results in replacement documents or amendments with their own document identifiers enabling these to be formally distinguished from the main document. But how can we formally identify a modified document if the issuing body does not publish a new standardization document because, for instance, only slight editorial changes were made? To cater for such cases, the DITR database has now introduced a VERSION field identifying the date on which change(s) to the version were made. VERSION is a useful aid when deciding whether to procure documents and is also helpful for a companys document management. VERSION is currently being used for 30 collections (e.g. EN, ISO, IEC, ASTM) and has been assigned to 2,426 records (August 2014). A feature particular to ASTM is that VERSION is used when the issuer ASTM has added a small letter e to the original document identifier (e denotes editorial changes) with a corresponding version number. | Document identifier of original: ASTM A304-05e2 Document identifier acc. to DITR: ASTM A 304 Edition: 2005 Version: 2005-08
Document identifier of original: ASTM A377-03(2008)e1 Document identifier acc. to DITR: ASTM A 377 Edition: 2003 Version: 2009-01 Document identifier of original: EN 60794-3-10Document identifier acc. to DITR: EN 60794-3-10Edition: 2009-04Version: 2009-05 |
Version history (Back to field list) | VERSHIST
| Document identifiers of a documents predecessors and successors in their entirety, including that of the document itself | If desired, the spaces between the document identifier and the date of edition can be omitted. Beside the entries given, further categories of documents stated in the history can be included (e.g. ID, FIDAS key) in order to clearly identify documents with which a relationship exists. | DIN 4843-100 (1993-08): DIN EN ISO 13287 (2008-01)*DIN EN ISO 20345 (2007-12)*DIN EN ISO 20344 (2007-11)*DIN EN ISO 17249 (2007-07)*DIN EN 15090 (2006-10)*DIN EN ISO 17249 (2004-12)*DIN EN ISO 20344 (2004-10)*DIN EN ISO 20345 (2004-10)*DIN EN 13287 (2004-08)*DIN EN 345-2 (1996-08)*DIN EN 344-2 (1996-08)*DIN 4843-100 (1993-08)*DIN 4843-100 (1991-03)*DIN 4843/A1 (1988-12) |
Withdrawal date (Back to field list) | ZURUCK
| Withdrawal date of a standard or date of expiration of legislation. Format: YYYY-MM(-DD) | Also available: Date that data set is deleted (e.g. to correct duplicates). Format: YYYY-MM-DD and "AUSHISTZUR" Date that data set is reinstated (e.g. because document was withdrawn by mistake) Format: YYYY-MM | 1996-03 or 2005-07-01 |